Summary
Brand: +GF+
Category: Flow Meters, Paddlewheel Flow Meters
Liquids: Chemical, Clean Water, Dirty Water
Part ref: 3-2536/ 3-8512
IWN: FLO-834935
Simple, economical design
Highly repeatable output
Easy to replace rotor
iCenta is a UK specialist in +GF+ Signet instrumentation
Simple to install with time-honored reliable performance, Signet 2536 Rotor X Paddlewheel Flow Sensor’s are highly repeatable, rugged sensors that offer exceptional value with little or no maintenance.
The Model 2536 has a process-ready open collector signal and has a wide dynamic flow range of 0.1 to 6 m/s. The sensor measures liquid flow rates in full pipes and can be used in low pressure systems. The Signet 2536 sensors are offered in a variety of materials for a wide range of pipe sizes and insertion configurations. The many material choices including PP, PVDF, and Tefzel® make this model highly versatile and chemically compatible to many liquid process solutions. Sensors can be installed in DN 15 to DN 900 pipes using Signet’s comprehensive line of custom fittings. These custom fittings, which include tees, saddles, and weld-on fittings, seat the sensor to the proper insertion depth into the process flow. The sensors are also offered in configurations for wet tap installation requirements.
Features of the Signet 2536 Rotor X Paddlewheel Flow Sensor include:
- Wide dynamic flow rate from 0.1 to 6 m/s
- Open-collector output
- Simple , economical design
- Highly repeatable output
- Installs into pipe sizes DN 15 to DN 900 (0.5 to 36 in.)
- High resolution and noise immunity
- 7.6m of cable for standard and Wettap sensors
- Chemically resistant materials
- Easy to replace rotor
Other Applications:
- Pure water production
- Filtration systems
- Chemical production
- Liquid delivery systems
- Pump protection
- Scrubbers/gas stacks
- Gravity feed lines
- Not suitable for gases
Order Specification
Ordering more than 5 of this product?
Please get in touch for a quote.
Product Specification
The Signet 2536 Rotor X Paddlewheel Flow Sensor is a general purpose paddle wheel flow sensor offered in a variety of materials and with installation fittings for a wide range of pipe sizes and insertion configurations
Specification Detail of the Signet 2536 Rotor X Paddlewheel Flow Sensor:
| Pipe Size | DN15 – DN900 |
| Material Body | PP, PVDF, Tefzel |
| Flow Range | 1.2 l/min -51,951 m3/hr |
| Linearity | 1% |
| Operating Temp Range | -18 to 85ᵒC |
| Pressure Range | 1.7 – 14 bar |
| Outputs & Comms | Open collector, sinking 10 mA max. |
| Insertion / Inline | Insertion / Inline |
| Fluid Type | Clean water, dirty water, chemicals |
| Applicable Liquids | Water, waste water, chemicals |
| Power | 5 to 24 VDC ± 10% regulated |
| Approvals | CE, FCC |
| Connection Type | Screwed (custom) |
Manuals available on request. Contact us for more information.
Equipment Hire:
It is possible to hire instrumentation for short or extended periods of time.
Please contact us to discuss your needs +44 (0) 1722 442 307 or email [email protected]
Product Warranty:
This product has a warranty period of 12 months from the date of supply which is deemed as the invoice date. We will undertake to repair or replace any parts which prove to be defective within that time or to offer a credit/refund provided the instrument(s) have been returned (carriage paid) within the warranty period.
The product warranty will be invalidated if labels have been removed, the goods have been abused, altered, used at ratings above or below the maximum specified or otherwise misused in any way.
All flow meter products are shipped fully calibrated and ready for installation. To ensure optimum performance, we recommend that you recalibrate the instrumentation every 12 months.
Product Returns:
We accept returns up to 14 days after initial despatch.
Should you wish to return your product please contact us on +44 (0) 1722 442 307 or [email protected]
Over the years iCenta has supplied goods to countries all over the world with knowledge and experience in exporting and importing overseas via air, sea and road.
Carriage:
All orders are subject to a carriage charge which is dependent upon the weight, dimensions and method used. This charge will be added at check out.
We can offer the following services:
- UK Express (Next Day Service) – based on 24hr delivery via DHL
- UK Standard – based on 1-2 days delivery via DHL
- Worldwide Express – based on 1-2 days delivery via DHL
- Worldwide Economy – based on 2-5 days delivery via DHL (available for Europe & Southern Ireland)
All orders must be placed by 2:00pm and delivery times are subject to stock being available. Shipments are charged at the greater or actual volumetric weight.
Arranging shipping yourself?
Should you wish to arrange collection, in person or via courier, please contact us and provide the details.
Full details are available within our Terms and Conditions.
Delivery:
The goods are packaged securely before despatch. Tracking numbers and details will be provided to you. Dates and times of delivery are estimated according the method of carriage used. Please specify if you have a date/time when you require the goods and every effort will be made to accommodate you.
Providing Solutions:
At iCenta we ensure our experienced staff are always available throughout your product search or purchase. Providing guidance whether it’s a complex technical question or set of requirements to find a solution to or just a simple question.
We pride ourselves in understanding every aspect of our product ranges which means you can be certain of finding a solution to fit your needs.
Performance Guarantee:
We are confident that you will find our service and products exceed your expectations that we’ll guarantee the performance of your instrumentation in your application.
Making your decision as risk free as possible.
Ask our technical sales team for further details.
Installation and Maintenance:
Our service doesn’t just end at despatch. We offer a complete range of after-sales services to ensure you get the very best experience from choosing iCenta.
Installing instrumentation can be a simple task, but when it forms part of a complex multi-instrument set up or even just in a difficult to access location; we can help.
Keeping instrumentation maintained ensures reliable and accurate performance for many years. Calibrating flow meters annually is particularly essential.
