The Tracker 211 is a budget-priced 4 digit universal input panel indicator with 0.05% accuracy for temperature and process measurement.
Specification Detail of the Tracker 211 Panel Indicator:
|Display||Type: 14.2mm high brightness red LED (green option) Range: 4 digit ( -1999 to 9999 )|
Update rate: 2 per second
|Material Body||Front panel – Protection to IP65|
|A/D Converter|| Type: Dual slope integrating with auto zero|
Conversion rate: 100mS
Common mode rejection: >150dB
Series mode rejection: >70dB (50 & 60Hz)
|Thermocouple Inputs|| CJC accuracy: Better than 1°C after 30 minutes|
Open circuit sensor detection: Upscale
Engineering units: °C or °F
Measurement resolution: 1 or 0.1°C/°F
|Operating Temp Range||-10 to 70°C|
|Humidity||0-95% RH non condensing.|
|Outputs & Comms||4 to 20mA|
|Voltage & Current Inputs|| Ranges: ±20mA, ±100mV, ±10V DC.|
Scaling: Any portion of the display range (decimal point in any position)
Accuracy: ±0.1% (worst case), 0.05% typical @ 25°C ambient
Drift with temperature: <200ppm/ °C Impedance (Ohms): <5(mA),>100M(mV), >1M(Volt)
|Approvals|| Safety: EN61010 Susceptibility: EN50082-2|
Emissions: EN50081-1 CE Certified 2000
Manuals available on request. Contact us for more information.
It is possible to hire instrumentation for short or extended periods of time.
Please contact us to discuss your needs +44 (0) 1722 442 307 or email [email protected]
This product has a warranty period of 12 months from the date of supply which is deemed as the invoice date. We will undertake to repair or replace any parts which prove to be defective within that time or to offer a credit/refund provided the instrument(s) have been returned (carriage paid) within the warranty period.
The product warranty will be invalidated if labels have been removed, the goods have been abused, altered, used at ratings above or below the maximum specified or otherwise misused in any way.
All flow meter products are shipped fully calibrated and ready for installation. To ensure optimum performance, we recommend that you recalibrate the instrumentation every 12 months.
We accept returns up to 14 days after initial despatch.
Should you wish to return your product please contact us on +44 (0) 1722 442 307 or [email protected]
Over the years iCenta has supplied goods to countries all over the world with knowledge and experience in exporting and importing overseas via air, sea and road.
All orders are subject to a carriage charge which is dependent upon the weight, dimensions and method used. This charge will be added at check out.
We can offer the following services:
- UK Express (Next Day Service) – based on 24hr delivery via DHL
- UK Standard – based on 1-2 days delivery via DHL
- Worldwide Express – based on 1-2 days delivery via DHL
- Worldwide Economy – based on 2-5 days delivery via DHL (available for Europe & Southern Ireland)
All orders must be placed by 2:00pm and delivery times are subject to stock being available. Shipments are charged at the greater or actual volumetric weight.
Arranging shipping yourself?
Should you wish to arrange collection, in person or via courier, please contact us and provide the details.
Full details are available within our Terms and Conditions.
The goods are packaged securely before despatch. Tracking numbers and details will be provided to you. Dates and times of delivery are estimated according the method of carriage used. Please specify if you have a date/time when you require the goods and every effort will be made to accommodate you.
At iCenta we ensure our experienced staff are always available throughout your product search or purchase. Providing guidance whether it’s a complex technical question or set of requirements to find a solution to or just a simple question.
We pride ourselves in understanding every aspect of our product ranges which means you can be certain of finding a solution to fit your needs.
We are confident that you will find our service and products exceed your expectations that we’ll guarantee the performance of your instrumentation in your application.
Making your decision as risk free as possible.
Ask our technical sales team for further details.
Installation and Maintenance:
Our service doesn’t just end at despatch. We offer a complete range of after-sales services to ensure you get the very best experience from choosing iCenta.
Installing instrumentation can be a simple task, but when it forms part of a complex multi-instrument set up or even just in a difficult to access location; we can help.
Keeping instrumentation maintained ensures reliable and accurate performance for many years. Calibrating flow meters annually is particularly essential.